A/C Leak Freeze with Magic Frost 1.5 Ounce

Features:

• Will stop leaks of refrigerant gas in appliance and refrigeration systems


• Made in the USA and OEM approved


• AC Leak Freeze is compatible with all refrigerants and oils except Ammonia


• Ideal for preventive maintenance and leak protection


• Permanently seals leaks in air conditioning and refrigeration systems


• Will continue to seal additional leaks for up to 1 year that meet testing specifications


• Does not contain polymers


• Not activated by moisture or oxygen


• Tested to be non-clogging to AC compressors, recover units, schrader valves, cap tubes, TXV valves, micro channels, evacuation equipment and gauges


• Suitable for use in all heat pumps and copper or aluminum coils

Features of Magic Frost:

• Extends compressor life and reduces noise


• Improves AC system lubrication and reduces friction


• Cleans and revitalizes the AC system


• Reduces energy consumption


• Enhances the performance of older AC systems

Dose and Application Instructions:

• Applications: AC and Refrigeration Systems


• Tons: 1-6 (1.5 Ounces)

AC Leak Freeze Instructions for use:

1. Turn the unit on, the compressor and unit must be operating at full power

2. Unscrew the cartridge cap and connect the adapter to the cartridge

3. Connect the special adapter (do not overtighten) and push out the air contained in the transparent hose while the system continues to run

4. Choose application option (do not attach to the high-side of the AC system)

    A. Low Pressure (40PSI and under): simply push AC Leak Freeze in with the syringe plunger

    B. Med-High Pressure (80PSI and under): place the syringe in a standard caulk gun and slowly

        ratchet AC Leak Freeze into the system

    C. High Pressure (above 80PSI): pump down or isolate the high side of the system to reduce

        pressure on the low side or service

5. Connect the adapter to the low pressure port of the AC system and inject contents

6. Disconnect the cartridge from the AC system or refrigerant system

7. If necessary, charge the system

8. Allow at least 30 minutes for the repair to take place with the system running

Product Details